EVS XFLY Streamer Version 1.01 - January 2013 User Manual - Manual (Page 21)

XFLY.STREAMER – Version 1.01 – User Manual
EVS Broadcast Equipment – Jan 2013
Issue 1.2
21
5.4 Status & Commands Area
Area Description
Server TC This area will display the Timecode reference from the
first server selected in the servers' list. This area is not
editable.
TC IN The TC IN field is editable. Click into the TC IN field and
enters manually a TC value.
The TC IN value must exist in the material of the selected
server.
This means that only TC “in the past” can be
entered in the TC IN field.
TC OUT The TC OUT field is editable. Click into the TC OUT field
and enters manually a TC value.
The TC OUT value must be higher than the TC IN value.
E/E When clicks in the TC IN field and enters manually a TC
value. When clicks E/E button will clear the TC IN and TC
OUT fields.
When pressing REC updates the Maximum duration
value. The E/E button remains on the screen but is
disabled.
Duration This area displays the duration requested according to
the TC IN/OUT values or if TC OUT not defined,
according to the maximum duration setting.
Record button Starts the backup of the recoding trains on all selected
channels. The backup record starts instantly.
The Record button lights red when the recording is in
progress.
Stop button Stops the backup of the record trains on all selected
channels. The backup record will be stopped when the
user clicks the Stop button. As the backup files need to
close properly, it can however take some time before the
job is finalized. During this time, the message
"Finalizing..." will be displayed in the status area.
The button lights blue when the recording is in progress
and then the Stop command is enabled
Status The Status area displays all the information related to the
operations and the error messages.