Clip-list element contextual menu, Cut/copy/paste an element, Remove element / remove all elements – EVS IPDirector Version 5.9 - January 2011 Part 5 User’s Manual User Manual

Page 58

Advertising
background image

IPDirector Version 5.9 – User Manual – Part 5: Playout – Player Control Panel

EVS Broadcast Equipment – January 2011

Issue 5.9.B

47

C

LIP

-L

IST

E

LEMENT

C

ONTEXTUAL

M

ENU

The commands in the contextual menu available when right-clicking on an element

of the playlist are described in the following sections

Cut/Copy/Paste an Element

The operator can cut, copy and paste one or several elements within the list in the
following ways:

using the Windows shortcut keys (CTRL+X, CTRL+C and CTRL+V)

right-clicking in the element list to open the contextual menu when the

required elements have been selected.

Then:

a Cut and Paste operation will move the selected elements.

a Copy and Paste operation will copy the selected elements.

The elements are inserted in the playlist before or after the element selected when
the Paste operation is initiated. This depends on the Insert Mode in Playlist

parameter of the Playlist settings. See the Tools > Settings > Playlist >
Playlist/General
category.

Remove Element / Remove All Elements

To remove one or more selected elements from the playlist, select Remove
selected element(s)
from the contextual menu.
To remove all selected elements from the playlist, select Remove All Elements
from the contextual menu.

A warning message will be displayed, requesting the user to confirm the action:

Note

If a group is part of the selection, all elements of the group will be
removed.

Advertising