EVS IPDirector Version 5.6 - May 2009 Part 3 User's Manual - Manual (Page 9)

Issue 5.6.D IPDirector Version 5.6 – User Manual – Part 3 – Browsing
EVS Broadcast Equipment – May 2009
VIII
About this Manual
This manual is intended to cover all aspects of IPDirector. It should be seen as a
reference guide that provides a detailed description on the various modules of
IPDirector, as well as procedural information on how to work with the IPDirector
system. The user manual for IPDirector Version 5.6 is divided into 7 parts.
This is part 3 of the manual.
P
ART
1: G
ENERAL
W
ORKSPACE
The first part contains the following chapters:
Chapter Description
Introduction This chapter gives an overview on the product and
describes the components of the IPDirector suite.
IPDirector Main
Window This chapter details the various areas in the IPDirector
main window, i.e. the window that opens when IPDirector is
started.
Channel Explorer This chapter describes the Channel Explorer, i.e. the
module that provides an overview on the components of
the XNet network. It allows the users, among others, to
take control of one or several channels from different XT[2]
servers connected to the XNet.
System
Management This chapter contains a description of overall system
settings:
• shortcut definitions
• Remote P configuration
• ShuttlePRO configuration and button layout
P
ART
2: L
OGGING
The second part contains the following chapters:
Chapter Description
IP Logger This chapter provides information on the IPLogger module,
which is used to create logs that relate to recorded events
with timecodes, camera angles, clip numbers and
metadata.
Keyword
Management This chapter covers the management of keywords, i.e. the
creation and setup of the various tools which allow the
users to assign keywords to logs, clips, playlists or
timelines in a unified manner. Assigning keywords to logs
logs, clips, playlists or timelines make it possible to search
on the video material stored on the XNet network and