High Lifter Lift Kit for Kawasaki Mule 3020 - Manual

High Lifter Products, Inc. (318) 524-2270
780 N Professional Drive Fax (318) 524-2297
Shreveport, LA 71105
Kawasaki Mule Lift Kit Installation Instructions
Mule 2500, 3000, 3010, and 3020
Read Before Installation!
This product is designed for use on Kawasaki Mule’s in which additional ground clearance and fender clearance is desired. It
is designed for utility type, slower-speed use on relatively flat terrain in deep mud or snow. Although we have many thousands
of satisfied lift kit customers and over 400 franchised dealers selling and installing lift kits, purchasers should be aware that
use of this product may increase the frequency of required maintenance, part wear, and will raise the center of gravity on your
Mule increasing risk of roll-over on side hills, ditches or other steep terrain.
We recommend that wider tires with stiffer sidewalls be used to achieve a wider stance and to improve stability of the Mule.
Riders should be advised that the handling characteristics of a taller Mule is different and require extra care when riding on
side hills or off-camber situations. If you further raise the center of gravity by adding heavy loads to racks or seats, the Mule
must be operated with care, at slower speeds or on relatively flat ground.
Operation of any style ATV with or without a lift kit, while or shortly after consuming alcohol or drugs, subjects the rider to
the risk of serious bodily harm or possible death. This is compounded if the rider does not wear an approved helmet and other
safety gear. High Lifter urges that all approved safety gear be worn when riding an ATV.
If this is not what you expected, or is not consistent with your intended use, you should return the product immediately to the
seller, before installation, for a refund of the purchase price; less any fees. After installation, product is warranted for 90 days
for defects in workmanship and materials. Warranty is limited to refund of the purchase price or replacement of the kit, at the
seller’s option.
Parts Diagram
1