High Lifter Lift Kit for Honda Rancher 420i (09-13) - Signature Series - Manual (Page 5)

5
Rear Lift (Brackets in photos may not look like the finished production bracket)
1) Place jack under ATV at the rear of the bottom skid plate and lift until the weight is off of the
suspension. Be careful to secure the ATV properly so as not to fall off the jack.
2) Remove the tires from each side.
3) Remove the top of the shock from the shock mount on both sides at this time.
4) For easier installation use a ratchet strap. Place the hooks on each hub and ratchet tight.
5) Next place the long rear lift bracket next to the frame.