High Lifter Lift Kit for Polaris 800 RANGER RZR “S” and “4” - Signature Series User Manual
Page 4
Advertising
4
7) Insert the 10x55mm hex bolt through the plates and spacer from the rear towards the front then secure
it using a 10mm lock nut.
8) Follow the steps for the opposite side.
9) Next attach the top of the shock to the lift brackets using a 10x55mm hex bolt and 10mm lock nut.
Insert the bolt from the rear through to the front.
10) Place wheels back on UTV and torque lugs to factory specification.
Advertising