High Lifter Max Clearance Front Forward Upper & Lower Control Arms for Polaris RZR 800 "S_"4"" - Manual (Page 7)

7
Aligning the front wheels
1. Make sure that the brake rotors are straight to sight.
2. Take a tape measure and measure from inside to inside on the front and back ends
of the rotors.
3. They must both be the same distance. If they do not then you will need to adjust
the tie rods in or out.
NOTE: A slight toe out makes the steering less sensitive and the UTV more stable.
When adjusting the toe, be sure to take the time to adjust both ends half the required
distance.