High Lifter Radiator Relocation Kit - Polaris 800 (05-14) - Manual (Page 5)

9. Now attach the overflow bottle to the right leg of the rack mount kit. You will need to
use the two small spacers, 6 x 35mm bolts, 6mm lock nuts and washers. You will need to
thread the bolt through the plastic. The bolt is a little oversized for the hole.
10. Next attach the filler neck and radiator cap to the top of the right leg of the rack mount
kit. Use two of the medium spacers, ¼ x 2 ¼ bolts and ¼ lock nuts.
11. Attach the hoses from the neck to the radiator and from the neck to the overflow bottle.
You will need to reuse the small OE clamps to hold the hose in place from the neck to the
radiator. The small black hose is provided, but you will need to cut the overflow line.