High Lifter GUARDS DIAMOND PLATE FRONT CV BOOT YAM. 660 GRIZZ - Manual

High
Lifter Products, Inc. (318) 524-2270
780 Professional N. Dr. Fax (318) 524-2297
Shreveport, LA 71105
Yamaha 660 Grizzly
Front CV Boot Covers
Components:
CV Boot Covers 2ea
¼ x 1” Bolts 4ea
¼ “ Hex nut 4ea
Installation:
1. To make installation easier, turn off the gas inlet valve, place the transmission in park, and with
assistance stand ATV on its rear.
Installation can be done with ATV on the ground.
NOTE:
Anytime an ATV stands on its rear there is a danger of it falling. It is recommend that when
the ATV is standing on its rear that it be secured to a stable object, using a rope or ratchet strap.
2. Remove the plastic factory CV covers.
3. Install the High Lifter Front CV Boot Covers, using the factory holes and hardware provided.
4. Check the routing of electrical wires on the inside edge of the left CV Boot
Guard and if necessary move wires to the backside of the frame.