High Lifter Lift Kit for Kawasaki Brute Force 750i (05-14) - Manual (Page 5)

5
5) Use the 10 x 45 bolts to secure the shock to the bracket and the bracket to the frame. Before you
fasten the bolts place, attach the support bracket to the tube bracket. Placing the bracket so that the
notched portion clears the frame.
6) Once the support bracket is in place use the 10mm lock nuts to secure the bracket and the shock to
the tube bracket.
7) Connect the smaller rear support bracket to the larger support bracket, “sandwiching” the frame.
Use the 10 x 35 hex bolts and 10mm locking nuts.
8) Repeat steps for opposite side.
9) Tighten all nuts and bolts to manufacturer’s torque specifications and lower jack. Check for
clearance problems or misalignment.