High Lifter Pull Starter Leak Shield for Honda Rincon 650_680 - Manual

1
High Lifter Products, Inc. 318-524-2270
780 N Professional Drive FAX 318-524-2297
Shreveport, LA 71105
Pull Starter Leak Shield
Warrant disclaimer:
The components of this product are upon delivery, warranted to be free of manufacturing defects and will,
for a period of 30 days, or until installation, whichever comes first, will be replaced upon return to the
seller with proof of purchase.
Due to the wide variation in installer’s skill, there is no warranty of any kind, once the product has been
installed. Specifically excluded from warranty is any consequential damage to other engine components.
Instructions:
1. Remove your recoil starter it will not be reused. If you require the use of your pull rope then
stop now and return this item before it is installed.
2. Remove original starter pulley. Retain original pulley bolt and o-ring. If
you do not know what your recoil pulley is, STOP and let your local ATV
technician do this for you.