High Lifter Radiator Relocation Kit - Kawasaki Brute Force 750i (12-14) User Manual
Page 7
Advertising
16. Next you will need to cut the connector on the back of the stock fan. You will extend the
wires to allow the connector to reconnect under the plastic.
17. Use the blue and black wires provided in the kit. Use the butt connectors provided to
extend the wires. Match the wires provided in the kit with the stock wires.
18. Wrap the wires in black tape, and run it through the ¼” wire loom. Connect the end back
to the connector under the plastic,
19. Run it up through the hole where you ran the overflow bottle lines.
Advertising