High Lifter Max Clearance Series Trailing Arm Kit for Polaris RZR XP 900 - Manual

780 Professional Drive N Shreveport, LA 71105 Phone (318)524-2270
Polaris RZR 900 XP Arched Trailing Arms PSATA-RZR9
Read Before Installation
This product is designed for use on ATVs and/or RUVs to increase ground clearance. It is designed
for utility type, slow-speed use on relatively flat terrain in deep mud or snow. Although we have
many thousands of satisfied customers and over 1,800 franchised dealers selling and installing
accessories, purchasers should be aware that use of this product may increase the frequency of
required maintenance, part wear, and increasing risk of roll-over, injury and death on all types of
terrain. It is your responsibility to always inform other operators and passengers of this vehicle
about the added risks.
We recommend that wider tires and/or wheel spacers be used to achieve a wider stance and to
improve stability of the ATV and/or RUV. Riders should be advised that the handling
characteristics of a taller ATV and/or RUV are different and require extra care when riding,
particularly on side hills or off-camber situations. If you further raise the center of gravity by
adding taller tires, heavy loads to racks or seats, or by any other means, the ATV and/or RUV must
be operated with even more care, at slower speeds and on relatively flat ground. All turns should
be done at a slow speed, even on level ground.
Operation of an ATV and/or RUV with or without a lift kit, while or shortly after consuming
alcohol or drugs, subjects the rider to the risk of serious bodily harm or possible death. This risk is
compounded if the rider does not wear an approved helmet and other safety gear. High Lifter
urges that all approved safety gear be worn when riding an ATV and/or RUV as a driver or
passenger.
If this product is not what you expected, or is not consistent with your intended use, you should
return the product immediately to the seller, before installation, for a refund of the purchase price;
less any fees. After installation, product is warranted for 90 days for defects in workmanship and
materials. Warranty is limited to refund of the purchase price or replacement of the kit, at the
seller’s option.
Dealers and other Installers
You are responsible for informing your customer and end user of the information contained above
and the increased potential hazards of operating an ATV and/or RUV that has been modified from
its’ stock settings. If you install aftermarket accessories, it is your responsibility to also install the
warning label prominently in view of the driver and in prominent view of the driver and passenger
on RUVs and multi-passenger ATVs. They should also be instructed to notify anyone operating the
vehicle, as well as any passengers, that the ATV/RUV has been modified.
As discussed above, it is critically important that they be instructed in the need for slower speed
operation, regardless of terrain, after the product is installed.