High Lifter Lift Kit for Yamaha Rhino 700 (08-13) - Manual (Page 6)

9) You will need to grind down a small portion of the bolt and shock for clearance.
10) Next you will need to notch the frame on the Rear Right Side nearest where the axle comes to the
frame. If you do not notch the frame the axle will rub the frame.
11) Next, attach the top of the shock to the ATV using brackets provided in the kit.
12) Place the large spacer between the shock mount tabs. On the outside of the shock mount attach the
rear lift brackets. Loosely secure the spacer and rear lift brackets with the 12 x 80 hex bolt and 12mm
lock nut.