High Lifter Tie Rod__Rack End Upgrade Kit for Can-Am Maverick 1000 (2013) Pro Series User Manual
Page 5
Advertising
10. If you have not done so already install the ½” Left Hand Jam nut onto the rod end.
11. Connect the rod to the rack and pinion with the small tapered end connecting to the left hand
heim.
12. Locate the 5/8” Heim Joint and place the 5/8” jam nut onto it. Make sure you run the jam nut
all the way down to the bottom of the threads.
13. Install the heim joint into the hex bar.
Advertising