Hotchkis 32101 Tools, Trailing Arm Bushing Install and Removal, Upper, GM User Manual
Bushing removal
Advertising
Bushing Removal
Be sure to clean the mount and old bushing. Use a penetrating oil to aid in removal.
Step 1: To remove the bushing, place the tool on the
rear of the bushing mount with the larger disk on the
opposite side. Spray penetrating oil on the bushing shell.
Step 2: Tighten nut until the large disk is up against the
bushing mount.
Bushing Removal/Installer Kit
32101
LARGE DISK
Advertising
Table of contents