Installing new upper trailing arms – Hotchkis 80003 TVS System, Sport, 67 GM A-Body, Big Block User Manual
Page 6
Advertising
INSTALLING NEW UPPER TRAILING ARMS
10. The new polyurethane can bushings come pre-assembled, but it is easier to install the new can bushing
with the polyurethane bushing out of the metal can. So, the bushing will have to be pressed out.
- First, set the bushing (flange down) in a vise. See picture. Notice the flange sits on top of the vise. It
is not compressed in the vise.
- Using a dead blow hammer, smack the bushing downward until the bushing is level with the metal
edge.
- Grab a large deep socket and use it as a punch to hammer the rest of the bushing out.
Advertising