Hotchkis 80114 1973-1976 Dodge A-Body TVS System User Manual

Page 19

Advertising
background image

16385 67-76 A-Body


Hotchkis Performance LLC.

2

1. Raise Vehicle

Raise the vehicle and put it up on jack stands. You may also use a 2-post or 4-

post lift.

2. Remove Stock Steering Tie Rods

Remove the left and right stock steering tie rods from the vehicle. A big hammer

is your friend in removing the ball joint studs from center link and spindle. A

pickle fork may be needed if they are really tight.

3. Set Initial lengths for the Hotchkis Tie Rods

With the stock tie rods off, measure the center to center dimension of each link.

Spin the hotchkis turnbuckle so that the center to center dimension matches the

stock part. This will be an initial setting. A front end toe alignment will be

needed once the tie rods are in place.

Continued to next page…

Advertising