KC HiLiTES KC #7420 Front Light Bar 99-04 Ford Super Duty F250_350 Installation - Manual

Thanks for choosing a KC HiLiTES product. We take pride in building the highest
quality, best engineered systems possible. Your satisfaction with our product is
important, so if you have any questions, please call our customer service line at 800-
528-0950.
Removing the Bumper...
Installing the Light Bar...
Before installing the KC light bar you
must remove the bumper bolts.
1. There are four bolts, two on either
side of the tow hooks located
through the gap in front of the
bumper (see photo A). Remove
them with an 18mm socket.
2. Let the bumper drop down. It will
only drop about 2 inches.
3. Retain the factory hardware (bolts
and nut plates), they will be
needed to secure the light bar.
1. Hold the KC Light Bar up and align
the holes in the light bar, bumper
and frame, then start threading the
factory bolts in the nut plates by
hand.
2. Once all of the bolts are started,
align the bumper and tighten the
four bolts.
3. Install the KC Lights of your choice
and enjoy.
Installation Instructions for
Front Light Bar
99-04 Ford Super Duty F250/350
KC 7420
KC HiLiTES, Inc. 2843 W. Avenida de Luces, Williams, Arizona 86046-0155 * 800-528-0950 * www.kchilites.com KC3263G - rev 102204
IF YOU HAVE ANY PROBLEMS
OR QUESTIONS, PLEASE CALL
CUSTOMER SERVICE AT 800-528-0950
See details on our website at
www.kchilites.com
23 Year Warranty
Bumper
Bolts
Photo A