Longacre 50370 Temperature Compensated Tire Pressure Gauge - Manual

1/09
TO TAKE PRESSURES: Turn unit on
(auto-Zeros at turn on)
. If Zero
is needed quickly tap On/Off button. To turn off hold
On/Off button 1 sec. True factory calibrated pressure
will be shown. Be sure TRUE FACTORY Calibration is on the
display in the lower right.
If not push lock temp button.
TO SAVE THIS PRESSURE TO THE DISPLAY: Push
Store Memory button. That pressure will be stored
on the display. Start at the Right Front, then the Right Rear,
Left Rear, then Left Front. Once you have all 4 pressures no
more can be stored without clearing. If you have stored
the wrong pressure push and hold Store Memory
2 seconds. The last reading will be cleared. Release button
and retake pressure. To clear all 4 continue to hold
Store Memory for 3 seconds.
TO TAKE TIRE TEMPERATURES: Push mode button. Display will
change as shown. Take temps as you normally would. Insert
the probe into the tire to the same depth each time, on the
outside edge, the center, then inside edge.
TO SAVE TEMPS ON THE DISPLAY
(all 12 if desired):
Take temps as you normally would. Insert the probe into
the tire - first on the outside edge, the center, then inside
edge. Wait until temp stabilizes. Push Store Memory
button at each point. Start at the Right Front, then the Right
Rear, Left Rear, then Left Front
(this is the order the temps are saved to the
display)
. Once you have 12 temps no more can be saved
without clearing. If you have saved the wrong temperature
push and hold Store Memory 2 seconds. The last reading
will be cleared. Release button and retake temp. To clear all temps
continue to hold Store Memory button for 3 seconds.
TO TAKE TEMPERATURES AND TIRE PRESSURES AT THE SAME TIME: Save valuable practice time
and get your pressures and temps as fast as possible. Start at the Right Front and take tire temps,
saving them on the display as described above
(remember to start at the outside of the tire, then center, then inside - this is
how it is saved to the display)
. When you have the 3 temps push the mode button to switch to the Pressure
Mode. Take the pressure as usual and save it on the display - described above. Move on to the
Right Rear, Left Rear, and Left Front, taking pressures and temps at the same time. When done all
12 temps and 4 pressures will be displayed to analyze or record.
176
146 152 161 198 209 216
210 204 221 245 253 266
32.3
18.5 32.3
16.3 28.8
Press Comp
OFF
Active Temp
95
TRUE
FACTORY
Calibration
Ultra fast temp
response
All 12 temps
displayed at once
All 4 tire pressures
displayed Nite light
Monroe, Wa 360 453 2030 www.longacreracing.com
(Temperature Compensating) Digital Tire Pressure Gauge
Indicates
actual true
pressures (NOT
compensated)
Temperature
Mode