Longacre 686 Series Pit Impact Gun - Operator’s Manual - Manual (Page 3)

PRECAUTION FOR BATTERY AND CHARGER
CHARGE BATTERY AT LEAST 1 HOUR before initial use.
!
1. CHARGE AT ROOM TEMPERATURE. Room temperature must be higher
than 32°F and lower than 122°F.
2. DO NOT CHARGE IF THE CHARGER’S CORD OR PLUG IS DAMAGED.
Charging with a damaged cord may result in a fire or electrical shock. If the
charger is damaged in any way, have it repaired by a qualified serviceman.
3. DO NOT SHORT ACROSS TERMINALS OF BATTERY. Take care that
metal such as paper clips, nails, the sides of a metal tool box do not cause
a short in your battery. Extremely high temperatures and fire can result.
4. DO NOT INCINERATE THE BATTERY.
WARNING! The warnings, cautions, and instructions detailed in this manual cannot
cover all possible conditions and situations that occur.
USE COMMON SENSE AND CAUTION WHEN OPERATING THE TOOL.
!
SPECIFICATIONS
3
Voltage: 24 volts DC
Variable Speed 0-2000 RPM
Impact Frequency: 0-4000 IPM
Max Torque: 300 FT LBS
Reversible / Electric Brake
Chuck: 1/2” Square Driver Includes:
1 pc 24V wrench
1 pc 1 hour CUL & UL approved charger
2 pcs 24V Ni-Cd rechargeable battery
1 pc carrying case
1 pc 1” deep socket
1 pc 3” extension
1 pc 5” extension
FUNCTION DESCRIPTION
1. 1/2” Square Socket Drive
2. Metal Gear Housing
3. Heavy Duty Motor #977
4. Direction Lever (Forward / Stop / Reverse)
5. Variable Speed Trigger Switch
6. Rubber Hand Grip
7. Battery Release Button
8. Rubber Protected Battery Pack
9. LED Working Light
10. LED Light Button
11. Battery
Indicator light
12. Battery Indicator Button
13. Charger