MSD 5520 Street Fire Ignition Control Installation - Manual (Page 4)

4 INSTALLATION INSTRUCTIONS
S T R E E T F I R E • W W W . S T R E E T - F I R E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
Harness PN 8876 - Dual Connector Coil.
Harness PN 8877 - 1996-on GM Vehicles.
GM IGNITIONS Wiring with an MSD Wiring Harness.
GRAY
TO
TACH
WWW.STREET-FIRE.COM PN 5520
CDI MULTI-SPA
RK
IGNITION
®
SMALL RED
WHITE
MAGNETIC
PICKUP
NOT USED
NOTE: SEE FIGURE 2 FOR COMMON MAGNETIC PICKUPS.
GRAY
TO
TACH
WWW.STREET-FIRE.COM PN 5520
CDI MULTI-SPA
RK
IGNITION
®
WHITE (NOT USED)
ORANGE
BLACK
SMALL
RED
DISTRIBUTOR
WITH
MAGNETIC PICKUP
MSD SYSTEMS Installing to an MSD Distributor.
GM IGNITIONS Wiring a Dual Connector Coil.
GRAY
TO
TACH
WWW.STREET-FIRE.COM PN 5520
CDI MULTI-SPA
RK
IGNITION
®
SMALL
RED
ORANGE
BLACK
WHITE
BOTH PINKS
RED
RED
NOTE: Cut and splice the two Pink wires
(coil positive) together and connect
to Orange wire of the ignition. Cut
and splice the two White wires (coil
negative) together and connect
to the White of the ignition. If the
vehicle is not equipped with a
factory tach, there will only be one
White wire.
NOTE: For a direct plug-in, use MSD
Harness PN 8876.