Naxa NF-519 - Manual (Page 14)

Page 13
3.11 Delete file
This item is used to delete the picture you select.
Use UP/DOWN button to select this item, then press ENTER button to confirm and the screen will
display as below:
Press UP/DOWN button to select Delete one or Delete select as desired and press ENTER button to
confirm.
NOTE: Press navigation buttons to select the picture you want to delete and press ZOOM button to
confirm.
3.12 Format memory
This item is used to format memory of unit.
Use UP/DOWN button to select this item, then press ENTER button to confirm and the screen will
display as below:
Press UP/DOWN button to select YES/NO.
-YES: is to format the memory of unit.
-NO: is to cancel.
3.13 Reset setting
This item is used to reset to factory default settings.
Use UP/DOWN button to select this item, then press ENTER button to confirm and the
screen will display as below:
Press UP/DOWN button to select YES or NO.
-YES: is go to factory default settings.
-NO: is to cancel.
3.14 Language
This item is used to set the menu display language. You can select ENGLISH or other languages.
3.15 Brightness
This item is used to set the level of TFT brightness. The level can be adjusted from 0 to 16.
3.16 Contrast
This item is used to set the level of TFT contrast. The level can be adjusted from 0 to 16.
3.17 Color
This item is used to set the level of TFT color. The level can be adjusted from 0 to 16.
3.18 Tint
This item is used to set the level of TFT tint. The level can be adjusted from 0 to 16.