Naxa NAS-3037 - Manual (Page 4)

Page 3
Bluetooth Speaker Instruction Manual
 Warranty card ( Optional)
Operation Instructions
1. Turn on ON/OFF switch to AUX-in, the green indicator light on, and the
speaker is in the AUX-in function. Turn the switch to BT (Bluetooth) position,
and speaker will have a response ring, the blue indicator light flash and the
green indicator also light on , Bluetooth function is available.
2. When connect to the USB DC in or adaptor, red indicator light on, charge
mode work. The speaker can be charged when it’s in ON or OFF status.(We
suggest to turn off speaker when charge it.)
3. The Bluetooth speaker will turn into snooze mode after 5 minutes
unused(means do not connect with bluetooth and User can setting time),
and speaker will have a continuous warning tone. Turn on the ON/OFF
switch again, and the speaker will turn into the normal working mode.
Below operations are available only under Bluetooth mode:
4. Short press “+“, volume up; Short press ”-“ ，volume down.
5. Short press “ ” for previous song; Short press “ ” for next song.
6. In the play mode, short press “ ” is pause/play function; When phone
call comes, there is response ring,short press “ ” to answer phone with
hands free; When phone call comes,long press “ ” to reject calling.In the
phone mode, press “ ” to hang up the phone conversation.
7. When blue indicator flashes fast, Bluetooth is searching signal, after
successful matched, the blue indicator light will be bright and flash
slowly.
8. The Bluetooth speaker can only match to one signal per time, the
connection can not be deleted when matching. It can only be deleted in
disconnection model.
9. It‘s not allow to show the same equipment name in the Bluetooth