Naxa NID-7007 - Manual (Page 4)

Page 3
1 OUTLOOK DESCRIPTION
2 POWER BUTTON USAGE
Turn On: Press the power button and hold for 2 seconds.
Turn Off: Press the power button and hold for 2 seconds →tap Power off→ tap OK.
Reboot: Press the power button and hold for 2 seconds →Tap reboot.
Force Off: If device does not respond, press and hold the power button for 5 seconds.
Reset: Press the reset button to force off the device. (Note: The current reset function can’t restart, can only be turned off, so you need to press the
power button restart the device after reset).
3 TOUCH-SCREEN NAVIGATION
Here are some tips on how to navigate around your device.
Tap: To choose an icon or option, tap it.
Tap & hold: Touch and hold one place about 2 seconds, and then release to display an option window.
Flick: to scroll through a list or more quickly, flick across the touchscreen (drag quickly and release).
When you flick a long list, tap the screen to stop it from scrolling.
To move an icon to the Desktop screen, touch & hold the icon, and then release it when it appears on the Desktop screen.
Touch, hold and then slide icons to reposition them on the screen.
Touch, hold and slide icons onto to remove them from the Desktop screen.
4 U-Disk
Insert U-Disk
Insert your U-disk into the device via USB host transfer cable. When ready for use, enter into the file browser and switch to the USB folder to view it.
Remove U-Disk
Close all applications or documents which have been opened on the U-disk. Tap → Settings →Storage →USB storage → Unmount this
storage device. When it displayed Mount this device and then you can unplug the U-disk.
Don’t insert and remove the U-disk repeatedly in a short time, as this may cause damage to the U-disk.
5 USING MICRO-SD CARD
The device supports maximum 32GB micro SD card.
Insert your card into the micro SD slot until it clicks into place. It’s OK.
Remove Micro-SD Card
Close all applications or documents which have been opened on the card. Tap → Settings → Storage →SD card → Unmount this storage
device.
When it displayed Mount this device and then press the card lightly; it is partially ejected allowing you to pull the card out.
Don’t insert and remove the SD cards repeatedly in a short time, as this may cause damage to the card.
We recommend using major brands of memory cards to avoid incompatibility.