Naxa ND-851 - Manual (Page 12)

Programming a DVD or CD
1. Install a DVD or CD into the player as previously instructed then press the PROG (Program) button, the
program setting menu will appear on the display as the figures below.
2. For CD, use the direction buttons to select and highlight the desired track number then press ENTER button.
The selected track number will appear on the list.
For DVD, use the direction button to select and highlight the desired title number. The current chapter number
will appear on the screen. Use the direction button to select and highlight the desired chapter number then
press ENTER button. The selected title/chapter number will appear on the list.
3. Repeat the same procedures until all the desired tracks are added in the list.
4. Press the Play/Pause button to play the selected tracks.
5. To cancel the program, press the Stop button twice.
OPERATIONS
Program setting
menu of CD
Program setting
menu of DVD
-11-