Naxa NCD-708 - Manual (Page 16)

Basic Operation
-14-
When the monitor turns downward to
a certain angle, it will draw in .
FIG.6
The touch buttons on the base of the
touch monitor:
Touch the
“ ” ICON on touch
screen to enter the setting mode, the
message will display like following :
Touch
“SYSTEM” on the setting menu,
touch the “ / ” ICONS to select the
adjustment item, touch the “ / ”
ICONS to adjust the selectment item, it
depends on your habit to setup the data.
TINT: 0 to 32
Adjust the tint if the human skin color is
unnatural.
-Adjustable when “NTSC “ is selected for
“NTSC/PAL “ .
ADJUSTABLE ITEMS:
COLOR: 0 to 32
Adjust the color for the picture-lighter or
darker.
CONTRAST: 0 to 32
Adjust the contrast of the bright and dark
portion.
BRIGHT: 0 to 32
Adjust if the picture is too bright or
too dark.
TFT Monitor Adjustment
In Radio mode, touch the “ ”
icon or In media mode , touch the
range to enter the home menu,
the message like following as below.
ANIMATION
In
RADIO mode, you can change the
playing time of animation among of
“OFF, 10S, 30S, 1M,1.5M, 2M, 3M and 4M ”.
Note:
Please set the playing time of the ani
-
mation to “ 10S ” for the first, when you
turn the unit on .
The touch buttons on the base of the
touch monitor:
(2). Button
to enter the setting menu.
The touch buttons on the base of the
touch monitor:
(2) (5) (6) (4) (3)
(1)
(1). (Power) button
in any modes, touch the
“ ” ICON
to switch the unit off .
(6). Button
Touch to allow inserting or ejecting
of the media discs.
(3). Button
to adjust the angle of the monitor
upward until your desired angle .
(5). Button
to adjust the angle of monitor down-
ward until your desired angle .
(4). Button
Touch to open/close the monitor .
Color
Tint
Contrast
16