Naxa NDL-429 - Manual (Page 5)

ILLUSTRATION OF THE KEYS ON
THE REMOTE CONTROLLER AND
THEIR MAIN FUNCTIONS
4
To video input connector (yellow)
To audio input connectors (red, white)
Note:
—
—
During DVD play, the TV volume may be at a lower level
than during TV broadcasts, etc. If this is the case, adjust the
volume to the desired level.
If the DVD/CD player is connected to the TV through a
video cassette recorder, the picture may not be played back
normally with some DVDs. If this is the case, do not
connect the player via the VCR.
CONNECT DVD PLAYER TO OTHER APPLIANCES
12V DC JACK
To connect external power source of an AC adaptor or a car
battery adaptor.
Please make sure that the DC voltage is 12V and with correct
polarity as per below.
Center pin is positive
The Center of DC 12V JACK is positive.
To power outlet
AC power cord
OR
Optical digital
audio cable
(optional)
TV set
Video/audio cable
Coaxial audio cable
(optional)
Decoder or Amplifier with Dolby
Digital (AC-3/DTS) processing
(All sold separately)
To optical digital
audio input
connector
To coaxial digital audio
input connector
R L
CONNECTING TO A DECODER WITH DOLBY DIGITAL
(AC-3/DTS) PROCESSING(OPTIONAL)
When DVD recorded in Dolby Digital/DTS are played, Dolby
digital/DTS bitstream is output from the player's OPTICAL
digital audio output connector or COAXIAL digital audio output
connector. When the player is connected to a Dolby Digital/DTS
decoder, you can enjoy theater-quality audio in your home. [An
optical digital audio cable or coaxial audio cable (both optional)
is required when an optional Dolby digital/DTS decoder is used.]
DISPLAY
TITLE MENU SETUP
MUTE
SLOW STOP
OK
SUBTITLE
AUDIO
SEARCH
REPEAT
PROGRAM
ZOOM
1 2 3
4 5 6
7 8 9
0
ANGLE
1
2
3
4
5
6
7
8 20
19
18
17
16
15
14
13
12
11
10
9
PLAY/PAUSE
1. DISPLAY BUTTON
2. TITLE BUTTON
3. PREV/F.BWD BUTTON
4. NEXT/F.FWD BUTTON
5. NAVIGATION BUTTONS
6. NUMERIC BUTTONS
7. ANGLE BUTTON
8. PROGRAM BUTTON
9. MUTE BUTTON
10. SETUP BUTTON
11. MENU BUTTON
12. STOP&USB/SD/MMC CARD BUTTON
13. SLOW BUTTON
14. OK (PLAY/PAUSE) BUTTON
15. SUBTITLE BUTTON
16. AUDIO BUTTON
17. SEARCH BUTTON
18. REPEAT BUTTON
19. ZOOM BUTTON
20. CLEAR BUTTON
CLEAR
USB/SD/
MMC CARD
BASIC CONNECTION
—
—
—
—
—
It is recommended to be connected to a multi-system TV.
Ensure that this player and other equipment to be
connected to the unit are in the standby or off mode and
disconnect the AC power cords before commencing
connection.
Do not block ventilation holes of any piece of the
equipment and arrange them so that air can circulate freely.
Read through the instructions before connecting other
equipment.
Ensure that you observe the color coding when connecting
audio, video cables.