Naxa NPB-428 - Manual (Page 8)

7
To Erase the Memory (Program)
To clear the program, you have two options:
1. Press the STOP button when the disc is stopped, or
2. Open the CD compartment lid, program will be erased.
REPEAT
To Repeat a Single Track
1. Press the PROG./P-MODE button once in play mode, “ REPEAT ” will flash on the display. The
current track will be played repeatedly until the STOP button is pressed
2. Press the PROG./P-MODE button once more to cancel.
To repeat all the Tracks
1. Press PROG./P-MODE button twice in play mode, “REPEAT ” shows steady on the display, all
tracks on the disc will be played repeatedly until the STOP button is pressed.
2. To cancel repeat play, press the PROG./P-MODE button once more.
To repeat current Directory (for MP3 only)
1. Press PROG./P-MODE button twice in play mode, “ REPEAT FOLDER” shows steady on the
display, The current directory will be played repeatedly until the STOP button is pressed.
2. Press the PROG./P-MODE button once to cancel.
RANDOM PLAY
Press the PROG./P-MODE button in play mode till the “RANDOM ” shows steady on the display, the
random play will start from next track automatically(or press CD skip forward button), until all tracks
are played over and then stop. Press the PROG./P-MODE button once to cancel.
INTROSCAN PLAY（for CD disc only）
Press the PROG./P-MODE button in play mode till the “INTRO” shows steady on the display, the unit
will start to play the first 10 seconds of music of each track, until all tracks are played over and then stop.
Press the PROG./P-MODE button once to cancel.
LISTENING TO USB PLAYBACK
1. Press the PLAY/PAUSE/USB button to select USB playing mode while the FUNCTION switch set to
CD/MP3/USB/AUX position.
2. Connect the USB to the USB INPUT. The LCD will display total number of tracks stored inside the
USB.
3. Press the PLAY/PAUSE/USB button to start playing. Press the PLAY/PAUSE/USB button once again
to temporarily stop. The track number will flash.
4. Press the STOP button to stop playing. The display will show total number of tracks.
5. Proceed repeat play (repeat 1/repeat folder/repeat all)/program play/random play/skip up and down
operation as the same described in above “USING THE USB/MP3”.
CAUTION:
 Do not use any USB extension cable for connecting the USB stick which may cause harmful
interference
 In case of malfunction due to electrostatic discharge, just reset the product (reconnect of power
source may be required) to resume normal operation.
BASS BOOST SYSTEM
The BASS BOOST BUTTON controls the bass of the unit. Bass sound is the lower frequency ranges of
sound. The knob can be pushed to OFF or ON position, When the BASS BOOST is on, the unit boosts
(increases) the sound output of the bass frequencies.