页 30, Troubleshooting – Naxa NCD-730 User Manual

Page 30

Advertising
background image

Troubleshooting

Please read the user manual carefully before using the car A/V system. If you have any
difficulty using this car A/V system,

. If you

still

after using all the suggestions, please contact

NO PICTURE, SOUND
* Ensure that the power switch is on.
* Ensure that the power cord is not damaged or the fuse is not blown.

NO SOUND BUT HAVE PICTURE
* Ensure that the player’s audio output

speaker’s audio

input.
* Check whether the audio connector is damaged.
* Check whether you have turned down the volume.
* Ensure that the audio is not in MUTE mode.

BLACK AND WHITE PICTURE OR SCREEN ROLLING
* Ensure that you have set right mode of video system (e.g. PAL, NTSC).

FLAWS OF PICTURE OR SOUND
* Check whether disc is scratched or stained.
* Check whether AV connector and output terminal is stained.
* Check whether there is condensation inside the lens. If so, power on the player and do
not work for an hour or so, then try again.

DISPLAYS: NO DISC OR BAD DISC
* Ensure that you have inserted a disc into the disc slot.
* Check whether disc is inserted with label side upwards.
* Check whether disc is bent.
* Check whether disc is stained or scratched badly.
* Ensure that disc format is compatible to the player.
* Ensure that temperature inside the car is not too high. If so, cool off until the ambient
temperature returns to normal.
* Insert another disc into the disc slot.

REMOTE CONTROL IS INSENSITIVE OR DOES NOT WORK
* Check whether the lithium cell of the remote control is powerful and working properly.
* Direct the IR emitting window of the remote control to the IR sensor of main unit.
* Check whether there are some obstacles between remote control and main unit.

SOME FUNCTION BUTTONS DO NOT WORK
* Turn off ACC power, then turn on again.
* Reset unit to zero, then turn on again.
* Remove control panel from chassis, reattach it onto the chassis and then turn it on again.

RADIO DOES NOT WORK
* Check whether antenna cable is connected firmly.
* Manually tune for a station.

refer to the troubleshooting guide

are

unable to resolve the problem

your dealer

or an authorised service centre .

is properly connected to the

Page 29

Troubleshooting

Advertising