Naxa NSM-436 User Manual
Page 13
12
DRM-encrypted WMA files are not supported.
Basic Operation
◆
Press FUNCTION to select USB or SD CARD mode .
◆
Connect a USB drive containing MP3/WMA files to the USB port or SD/MMC CARD to the
SD/MMC CARD slot on the bottom side of the unit. Playback will start automatically.
◆
Press ENTER ► to pause playback or press STOP to stop playback completely . Press
ENTER ► again to resume playback .
◆
Press FM.ST or BAND to select the previous or next track ,respectively .
◆
If the USB drive or SD/MMC CARD contain folders ,press Folder-UP or Folder-DN to cycle
through the folders.
◆
Playback will stop automatically when all tracks on the USB drive have been played .
◆
When the ID3 display is activated(also the USB or SD card contain folders) , the LCD will show
the file name ,the song name and the artist information .
RADIO OPERATION
Listening to AM or FM broadcasts.
Basic Operation
◆
Press FUNCTION to select TUNER mode .
◆
Press BAND to select the AM or FM band .
▲ AM :Listen to AM broadcasts .
▲
FM:Listen to FM broadcasts .
◆
Turn the AM/FM Tuning Dial to select a broadcasts stations ,press FM.ST to select Mono
or Stereo sound .
▲
when the tuner is locked into a stereo broaddcast ,the LCD screen will display “ST” Tuning.
▲
For the best FM radio reception , position the FM Radio Antennal located on the rear of the
unit away from the speaker and power cables.
▲
The AM antenna is built directly into the unit ,if AM reception is weak ,you may need to rotate
or move the unit to obtain a better signal ..