Identify the com port for your gps receiver – HP iPAQ Glisten-AT&T User Manual

Page 130

Advertising
background image

To reduce the time to find your initial position, you can also make sure you have a clear view of the sky

and you are stationary.

NOTE:

GPS Data downloads new data if the last downloaded data is expired. The expiration time

on the data is set to 24 hours.

Enabling the GPS Data application might involve additional data connection charges.

To enable GPS Data:

1.

Press Start , tap Settings > Connections > GPS Data.

2.

Select the Automatic Update check box.

3.

Tap Done.

After the GPS data file has been downloaded, you might see improvements in the GPS performance as

the time to find your initial position is reduced.

NOTE:

To disable the GPS Data application, clear the Automatic Update checkbox.

Identify the COM port for your GPS receiver

Some GPS applications require you to specify the COM port for your GPS receiver. You can find

information on the COM port by pressing Start , tap Settings > System > External GPS, and
then noting the GPS Program Port.

Troubleshoot frequent GPS signal loss and interference

To improve the satellite signal to your phone, go outdoors and start the GPS navigation software. Place

your phone where there is a clear view of the sky or on the dashboard of a vehicle that does not have

thermal glass windshields or windows. A direct line of sight is required between the iPAQ and the GPS

satellites to access information from the satellites.

NOTE:

Interference might take place close to tall buildings, large trees, and under very cloudy or

overcast skies. Try to avoid these obstructions before using GPS.

Interference Type

How to Avoid

Vehicles with thermal glass windows and windshields.

Place the iPAQ where there is a clear view of the sky or on
the dashboard of a vehicle that does not have thermal glass
windows.

Equipment radiating Radio Frequency (RF) energy or emitting
strong electromagnetic radiation. For example, microwave
ovens, high-power cordless phones, CB radios,
Walkie-talkies, HAM equipment, or X-ray and MRI machines.

Move away from interference source or switch off the
interference source.

Tall buildings, large trees, and very cloudy or overcast skies.

Move away from interference source so there is a clear view
of the sky.

118 Chapter 22 Use AT&T Navigator and other GPS Applications

Advertising
This manual is related to the following products: