Oracle Lighting ASI3-8 - Manual

162 WWW.ORACLELIGHTING.COM • TEL: 1-877-375-5555 • FAX: 1-877-375-3333
APPLICATION:
• Open office space ambient lighting for virtually glare free and
shadow free illumination.
• School class rooms, meeting rooms, retail stores.
PRODUCT FEATURES:
• Designed to mount on exact 4 foot and 8 foot centers. Joiners will
accept sterns, single cable, “V” cable and power cords.
• A computer designed optical system that maximizes the output of
T8 lamps while producing very wide distribution for even ceiling
brightness with mounting from 12 to 18 inches from the ceiling.
Total fixture efficiency 83.8%.
• Architectural ends. There are two die cast aluminum designs
available, “spade” and “bullnose” configurations. They are bolted
to the die cast joiners for a complete architectural look.
• Fixtures are shipped with die cast aluminum joiners installed for
suspension and structural continuity.
• Fixtures are designed with slots and white overlay that provide
limited downlight contribution and adds a horizontal glow to the
fixture design.
FINISHES:
• White 20 gauge roll formed steel housing.
OPTIONAL FEATURES:
• Fixtures can be wired for 2 lamp operation on each 4’ section.
• Adjustable cable suspension system provides a fast installation into
a variety of interior heights, including sloped ceilings.
• NEC required ballast disconnect is standard.
LISTING - UL/ C-UL listed to US and Canadian Standards.
WARRANTY - Guaranteed for one year against mechanical defects.
MOUNTING:
Pre-drilled mounting holes come standard on every fixture for
Cable suspension system and power cord every 48” and 96”.
Suspension Air Craft Cable System with Power Feed:
Suspension with 18 gauge white SJT Power Cord For T-Bar and
Slot-T applications available with 3, 4, 5 or 6 Through Wires.
Kit includes 5” diameter canopy cover finished in matte white
and 1/16” stainless steel aircraft cable which can be adjusted
from 12” to 36”. Must ordered per run. Part # TB-SACS-SJT-3
Suspension Air Craft Cable System ( No power Feed):
Cable Assembly includes 1/16” stainless steel aircraft cable,
which can be adjusted from 12” to 36”,and matte white
canopy cover. Part # TB-SACS-NW
DIMMING:
Various dimming ballast are available upon request including
Advance Mark 10, Mark-7, Lutron ECO-10 and Lutron Hi-Lume
ballast.
Electrical:
Male and Female 18 gauge 6 wire plug connectors are included
with every fixture to allow for simple hassle free continuous
wiring. Each fixture must be installed male to female.
7-3/4”
Add 4-1/4” for
Spade Endcap
Add 3” for Bull
Nose Endcap 2” Deep
LENGTH
4’=48", 8’=96”
T5 ARCHITECTURAL SUSPENDED LINEAR
SLOTS FLUORESCENT DIRECT/INDIRECT SYSTEM
Linear
Fluor
escent
Dir
ect/Indir
ect
ASI3
T5
ASI3
Male Female
48"
96"
4' RUN
96" 96"
96" 48"
96" 48" 96"
96" 96" 96"
Fixture Lengths & Mounting Locations
8' RUN
12' RUN
16' RUN
20' RUN
24' RUN
57”
105”
153
201”
249”
297”
Male & Female for Continuous Row Mounting
Catalog Number ASI3
Project Name Type