Binatone JE-8300 - Manual (Page 6)

6
BEFORE USING
THE APPLIANCE
X Thoroughly read these instructions.
X Remove all packing materials from the appli-
ance.
X Wipe the appliance body with soft damp cloth,
thoroughly wash all the appliance parts coming
into contact with food.
OPERATING INSTRUCTIONS
1. Place the juice extractor on dry level sur-
face. Make sure than the switch (10) is in the
«0» position.
2. Install the pulp container (11), as figure A
shows.
3. Put the separating unit (5) on the juice ex-
tractor body (9).
4. Put the grater/filter (4) on top of the separating unit (5) so
that it completely fits into the separating unit (5) and is fixed on
the motor unit (7). Check that the grater/filter (4) rotates
freely. Put the lid (3) on top.
Note: during disassembly always remove the grater/filter
(4) together with the separating unit (5).
5. Lift the safety lock (8).
Note: the juice extractor has a safety system. If the safety
lock (8) is not securely fastened, the appliance will
not operate.
6. Place the juice cup (12) under the separating unit’s spout (6).
If desired, you can use for juice collecting any suitable.
Disassembly
1. Make sure that the appliance is switched off and unplugged
from electrical outlet.
2. Lower the safety lock (8).
3. Remove lid (3). Then remove the separating unit (5). The
grater/filter (4) comes away together with the separating
unit.
4. Unfasten the pulp container (11).
Operation
1. Assembly the appliance (See «Assembly») and plug it in. Be-
fore plugging in make sure that the switch (10) is in the «0»
position and that the safety lock (8) is properly locked.
2. Wash the food before processing. You may process the whole
small-size fruits and vegetables (carrots, small apples, toma-