Oracle Lighting OT-LED-22 - Manual

WWW.ORACLELIGHTING.COM • TEL: 1-877-375-5555 • FAX: 1-877-375-3333
3-3/4"
23-3/4"
23-3/4"
2’ X 2’ LED RECESSED
SPECIFICATION GRADE TROFFER
LED Recessed Specification
Grade
Tr
off
er
2X2
OT-LED
PENDING
OT-LED
ORDERING INFORMATION: EXAMPLE: 22-OT-LED-4000-DIM10-35K-120
FIXTURE SIZE
2X2
DIMMING
DIM10
LUTH
LUMENS
2000
4000
VOLTAGE
MVOLT
120V
277V
EMERGENCY OPTION
EMG
CCT
35K-3500K
41K-4100K
50K - 5000K
22 OT-LED
APPLICATION:
General illumination for most commercial applications including schools,
offices & retail spaces.
PRODUCT FEATURES:
• Up to 100% efficiency.
• Mitered door frame prevents light leaks, and minimizes dust from
entering fixture.
• Constructed of one-piece ribbed unitized housing and corners that inter-
lock, preventing aesthetic damage to luminaire.
• Door frame is designed with cam latches and T hinges to secure frame
to housing.
OPTICS – By using a perforated lamp shield, the OT-LED gathers the light scattered
by the LED chips and shapes it into functional beams that provide sustained and
even illumination throughout any interior location, including commercial, residential,
educational, and professional environments. Sustained color quality is ensured. Our
perforated lamp shield directs low angle rays into usable, and user-friendly, light with
a full range of even distribution. Shield can be easily removed and replaced.
DURABILITY – Our heavy-duty 20 gauge aluminum housing is engineered for
maximum strength and extended life. Corners interlock to prevent aesthetic damage
to the fixture. Sides and corners are uniformly turned in and hemmed to remove
sharp edges for safe handling and easy installation. LED light engines are attached
directly to the aluminum housing and keep LED engines cool and energy efficient. Our
advanced thermal management system maintains LED engine light output at 70% of
initial lumens over 50,000 hours of operation.
PERFORMANCE – The OT-LED architectural lay-in fixtures put out more than 3,900
lumens and meet higher efficacy codes in compliance with more than 60LPW. The
light engines found in the OT-LED are rated at 85 CRI at a 3500K color temperature,
rated and tested to LM-79 and LM-80 standards. Our ultra-efficient LED driver is
rated at 50 to 60Hz at 120-277V input, producing less than 10% THD, featuring a
power factor of .90 to 1.00.
The LED’s are binned to a three step MacAdam’s ellipse to achieve consistent color
from fixture to fixture.
DIMMING
DIM10 (0-10V Dimming)
LUTH (
Lutron® Hi-lume® Dimming)
MAINTENANCE - LED engines can be accessed through the bottom by removing the
lamp shields. Ballast can be accessed though top via hinged doors.
SPACING CRITERIA: 1.4 • LUMENS: 2000-4000 • LIFE SPAN: 50,000 hours
• Gasketed door frame prevents light leakage.
• Clear 0.100” thick #12 pattern acrylic lens, standard.
• Post Painted high gloss white powder coat finish maximizes distribution
and efficiency while providing visual comfort.
• All sides and corners are turned in and hemmed removing sharp edges
for safe handling and installation.
• Four corner tie points are standard for safety wire support when
required. Built in earthquake clips standard.
LISTING - UL/ C-UL listed to US and Canadian Standards.
WARRANTY for 5 Years
SERIES
OT-LED - Oracle
LED Direct/Indirect
Catalog Number 22-OT-LED
Project Name Type