RBP Chemical Technology J0098 UV-100 - Manual

RBP Chemical Technology, Inc. RBP Chemical Technology, Inc. RBP Chemical Technology, Inc. RBP Chemical Technology, Inc.
150 S. 118 th Street P.O. Box 14069
Milwaukee, WI 53214-0069
www.rbpchemical.com
Corporate: 414-258-0911
Fax: 414-258-7908
RBP East: 508-865-0800
This product should be used only for its intended purpose. The information stated above is based on our laboratory tests and
experience, and is accurate to the best of our knowledge. Since actual use is beyond our control, the recommendations or
suggestions are made without warranty, expressed or implied.
Product Data Sheet Date: 08/16/11
Supersedes: New
PRODUCT #: J0098
UV-100
Press Wash for UV Inks
Description: A press wash for use with UV inks. In one step, UV-100 effectively removes ink and
contaminants from rollers and blankets. It does not require a water rinse but can be
rinsed with water to remove paper lint and coating.
Directions for Use: ROLLER WASH: Pour a generous amount of UV-100 on rollers while press is running.
Allow press to run while solution works on rollers. Engage wash up blades. When
rollers are clean, press is ready to resume operation. Repeat process for difficult
clean-up situations.
BLANKET WASH:
Pour a liberal amount of UV-100 on a cloth. Wipe across blanket
until residual ink and glaze are removed. For excessive paper coating and lint build-
up, dampen cloth with water before applying UV-100.
Specifications:
Appearance: Clear colorless liquid
Density: 7.1 lbs/gal
VOC Content:
(EPA Method 24)
7.1 lbs/gal, 850 g/L, 100 %
Flash Point: 116 °F