RBP Chemical Technology J9129 DIGI PLATE CLEANER - Manual

RBP Chemical Technology, Inc. RBP Chemical Technology, Inc. RBP Chemical Technology, Inc. RBP Chemical Technology, Inc.
150 S. 118 th Street P.O. Box 14069
Milwaukee, WI 53214-0069
www.rbpchemical.com
Corporate: 414-258-0911
Fax: 414-258-7908
RBP East: 508-865-0800
This product should be used only for its intended purpose. The information stated above is based on our laboratory tests and
experience, and is accurate to the best of our knowledge. Since actual use is beyond our control, the recommendations or
suggestions are made without warranty, expressed or implied.
Product Data Sheet Date: 03/16/12
Supersedes: 08/18/11
PRODUCT #: J9129
DIGI PLATE CLEANER
Acidic Spray On Plate Cleaner
Description: An acid based plate cleaner designed for use on CTP plates. DIGI PLATE CLEANER has
a blend of acids and cleaners to effectively remove ink and sensitivity from the plate
without affecting the image area of the unbaked CTP plate. This product can be used
"on the fly" as well as by hand.
Directions for Use: Apply a liberal amount of DIGI PLATE CLEANER to a dampened cloth and wipe across
entire plate surface to remove unwanted ink, tinting, and scumming.
Using a spray bottle, spray the DIGI PLATE CLEANER onto the dampening rollers
while press is running to remove any start-up scumming or tinting. In severe cases
reapplication may be necessary.
Specifications:
Appearance: Clear light pink liquid
Density: 8.7 lbs/gal
VOC Content:
(EPA Method 24)
0.8 lbs/gal, 96 g/L, 9.15%
Flash Point: None