RBP Chemical Technology J9007 ANTIFOAM - Manual

RBP Chemical Technology, Inc. RBP Chemical Technology, Inc. RBP Chemical Technology, Inc. RBP Chemical Technology, Inc.
150 S. 118 th Street P.O. Box 14069
Milwaukee, WI 53214-0069
www.rbpchemical.com
Corporate: 414-258-0911
Fax: 414-258-7908
RBP East: 508-865-0800
This product should be used only for its intended purpose. The information stated above is based on our laboratory tests and
experience, and is accurate to the best of our knowledge. Since actual use is beyond our control, the recommendations or
suggestions are made without warranty, expressed or implied.
Product Data Sheet Date: 03/21/12
Supersedes: 08/18/11
PRODUCT #: J9007
ANTIFOAM
De-Foaming Agent
Description: An additive to reduce and eliminate foaming problems in high agitation fountain
solution recirculating systems. ANTIFOAM Fountain Additive is highly concentrated
to control foaming with minimal usage.
Directions for Use: Add approximately 10 milliliters or one cap full of ANTIFOAM per ten gallons of
working fountain solution. Replenish periodically to control foaming problems.
Excessive use of antifoam could result in ink stripping and emulsification. If foaming
problems persist consult an RBP technical representative.
Specifications:
Appearance: Hazy white to off-white liquid
Density: 8.7 lbs/gal
VOC Content:
(EPA Method 24)
None
Flash Point: > 350°F