RBP Chemical Technology J5123 MRC ROLL CLEAN - Manual

RBP Chemical RBP Chemical RBP Chemical RBP Chemical Technology, Inc. Technology, Inc. Technology, Inc. Technology, Inc.
150 S. 118 th Street P.O. Box 14069
Milwaukee, WI 53214-0069
www.rbpchemical.com
Corporate: 414-258-0911
Fax: 414-258-7908
RBP East: 508-865-0800
This product should be used only for its intended purpose. The information stated above is based on our laboratory tests and
experience, and is accurate to the best of our knowledge. Since actual use is beyond our control, the recommendations or
suggestions are made without warranty, expressed or implied.
Product Data Sheet Date: 08/18/11
Supersedes: 05/11/98
PRODUCT #: J5123
MRC ROLL CLEAN
Metering Roller Cleaner
Description: MRC ROLL CLEAN is a fast evaporating metering roller cleaner designed to replace
the ozone-depleting, chlorinated solvent based roller cleaners. This product will
clean the roller surface effectively and without leaving any residue behind to
contaminate the dampening system. MRC ROLL CLEAN contains no chlorinated or
halogenated solvents.
Directions for Use: Disengage metering roller, saturate a clean rag with MRC ROLL CLEAN. Wipe roller
until clean. Apply a gum arabic solution such as RBP’s GUM ARABIC 14
°°°° Be to the
dampening system to promote water receptivity.
Specifications:
Appearance: Clear to pale yellow liquid
Density: 6.5 lbs/gal
VOC Content:
(EPA Method 24)
6.5 lbs/gal, 779 g/L, 100%
Flash Point: 25°F