Shogun Motorsports Honda CBR600RR (07-08) NO CUT Frame Slider - Manual

CBR600RR 07-08 NO CUT Frame Slider
Installation Instructions
Part Numbers: 755-3319, 750-3319, 750-3310,
850-3310
MADE IN THE USA!
Carefully read instructions in their entirety before the install
Professional installation is recommended. Always use proper safety measures during the install of this
product. Do not try to install this product without proper tools, recently calibrated torque wrench,
correct torque specifications from
factory service manual , safety goggles and gloves. The motorcycle
must be in a fixed secure position before the install process begins. DO NOT remove both engine studs
at the same time.
Shogun is not responsible for any part of your motorcycle for any reason. Precisely
measure location of cut and if in doubt at any point please call us before the install process has begun.
Replacement Parts List: Left Side Components (as if you were sitting on the bike)
QTY
Price each Part Numbers Descriptions
1
$20.00 99-FS-750-3319-L Black Left Side Puck
1 $20.00 99-FS-750-3310-L White Left Side Puck
1 $30.00 99-FS-850-3310-L Polished Billet Left Side Puck
1 $40.00 99-OF-750-3310-L Left Side Offset Black Anodized
1 $3.50 99-HB-SH10125080 Socket Cap 10 X 1.25 X 80 (Holds puck to offset)
Replacement Parts List: Right Side Components (as if you were sitting on the bike)
1
$20.00 99-FS-750-3319-R Black Right Side Puck
1 $20.00 99-FS-750-3319-R White Right Side Puck
1 $30.00 99-FS-850-3310-R Polished Billet Right Side Puck
1 $40.00 99-OF-750-3310-R Right Side Offset Black Anodized
1 $3.50 99-HB-SH10125070 Socket Cap 10 X 1.25 X 70 (Holds puck to offset)
Frame Sliders: Left side slider longer than right.
Installation Steps:
Some photos in this section are used for illustration examples only.
1.
Remove lower panel to expose mounting locations.
2.
Remove left engine stud. There is a spacer that is located between the frame and the engine.
Your left side offset will mount in this location.