Shogun Motorsports Suzuki GSXR600_750 (06-07) NO CUT Frame Slider - Manual (Page 2)

Installation Steps:
1.
Remove bodywork to expose mounting locations.
Tips: If you look on the right side of the motorcycle you will see about a 1.0 inch diameter
stock hole in the body. This is the engine stud location used for this kit, it is in the same location
on the left side.
2.
Attach the threaded frame cup spacers (99-SP-750-5410-L&R) to both left (99-OF-750-5410-L)
and right (99-OF-750-5410-R) offsets using one drop of blue thread locker on the end of the
8mm (99-HB-0812520) socket cap button head bolts. Tip: Do not attach frame slider pucks.
3.
Remove right side engine stud and loosen pinch bolt.