Shogun Motorsports Honda CBR1000RR (08-11) DMP Fender Eliminator Instructions User Manual
Page 4
Advertising
Moto911 Inc. - 1062 CalleNegocio, Ste. J, San Clemente, Ca. 92673 – (949)453-9111
4.
MAKE SURE YOU HAVE SAFETY GOGGLES AND GLOVES ON DURING THIS PROCESS!
In this section of the install we had to make a provision for a wiring harness. We simply took a Dremel
and sanding roll to make a clearance notch.
5. Using the base plate as a template mark were 6 X 30 bolts will go though. Remove base plate and
use a 15/64 drill bit to drill holes.
Advertising