Shogun Motorsports Honda CBR600RR (03-06) Frame Slider - Manual (Page 4)

9.
Remove left side bolt. Mount left side puck with (99-HB-SH121250120) Socket Cap 12 X 1.25 X
120 Main Engine Stud and torque down.
10.
Remove right side bolt. Loosen pinch bolt mount right side puck with (99-HB-SH121250120)
Socket Cap 12 X 1.25 X 120 Main Engine Stud and torque down, then pinch bolt.
READ CAREFULLY
Shogun cannot guarantee that they will protect your motorcycle from any extent of damage.
Shogun frame sliders are really meant to help possibly save the frame from damage in the
event of a crash. Because Shogun frame slider products have been successful in saving cases,
bodywork, levers and so on in the past, customers just assume sometimes you can put the
product on and no damage will happen. The fact is, some crashes result in little or no damage
to the motorcycle and some bikes are destroyed. It’s kind of like a bumper on a car sometimes
it works sometimes it doesn’t, it really depends on all the different forces applied during the
incident. We’ve seen bikes crash at 100 mph with little damage and some at 15 mph with
major damage.