Shogun Motorsports Honda CBR1000RR (08-12) Frame Slider - Manual (Page 4)

10. Mend the inner heat shield back to the panel and trim to match hole diameter. Tip: We used
high temp 3M adhesive.
11. Remove right side bolt. Mount right side puck with (99-HB-SH12125090) Socket Cap 12 X 1.25 X
90 Main Engine Stud and torque down.
12. Remove left side bolt. Mount left side puck with (99-HB-SH12125090) Socket Cap 12 X 1.25 X 90
Main Engine Stud and torque down.
READ CAREFULLY
Shogun cannot guarantee that they will protect your motorcycle from any extent of damage.
Shogun frame sliders are really meant to help possibly save the frame from damage in the
event of a crash. Because Shogun frame slider products have been successful in saving cases,