Shogun Motorsports Suzuki GSXR600_750 (11-13) Frame Slider User Manual
Page 4
9.
Reassemble left panel and mount.
10.
Mount left side puck with 99-HB-SH101250110 Socket Cap 10 X 1.25 X 110 Main Engine Stud
and torque down.
11.
Right side installation. Follow steps 1-9 but on the right hand side.
12.
Mount the right hand puck (shorter slider) with (99-HB-SH10125080) Socket Cap 10 X 1.25 X 80
Main Engine Stud and torque down.
READ CAREFULLY
Shogun cannot guarantee that they will protect your motorcycle from any extent of damage.
Shogun frame sliders are really meant to help possibly save the frame from damage in the
event of a crash. Because Shogun frame slider products have been very successful in saving
cases, bodywork, levers and so on in the past, customers just assume sometimes you can put
the product on and no damage will happen. The fact is, some crashes result in little or no
damage to the motorcycle and some bikes are destroyed. It’s kind of like a bumper on a car
sometimes it works sometimes it doesn’t, it really depends on all the different forces applied
during the incident. We’ve seen bikes crash at 100 mph with little damage and some at 15
mph with major damage.