Shogun Motorsports DMP Slingshot Tire Warmers Digital - Manual

DMP Slingshot Standard & Digital Tire Warmer
Part Numbers: 210-1010 & 210
Carefully read instructions in their entirety before
• DMP Slingshot tire warmers are sized to fit a 120mm width 17” front
width 17” rear race tire. DMP Slingshot tire warmers are also compatible with 16.5” series
tires. This product is intended only for DOT RACE TIRES and RACE SLICKS.
• Standard tire warmer set (PN# 210
warmer set (PN# 210-1031) include
each tire warmer.
• Power draw for front warmer is approx. 450W and rear warmer draws approx. 550W. These
warmers must be used with a proper
1.
Install front and rear tire warmers using high strength Velcro straps supplied on the warmer by
carefully pulling the warmer element over the tire. Tires
and rear stands. Bunching, overlapping, or folding over heated areas of the warmer may cause
overheating and damage the warmer!
DMP Slingshot Standard & Digital Tire Warmer Instructions
1010 & 210-1031
Carefully read instructions in their entirety before usage!
DMP Slingshot tire warmers are sized to fit a 120mm width 17” front race tire and 180
tire. DMP Slingshot tire warmers are also compatible with 16.5” series
This product is intended only for DOT RACE TIRES and RACE SLICKS.
Standard tire warmer set (PN# 210-1010) includes a front and rear tire warmer. Digital tire
1031) includes front and rear tire warmer with a digital control box on
Power draw for front warmer is approx. 450W and rear warmer draws approx. 550W. These
warmers must be used with a proper power supply in order to effectively heat cycle.
Install front and rear tire warmers using high strength Velcro straps supplied on the warmer by
carefully pulling the warmer element over the tire. Tires must be properly elevated
Bunching, overlapping, or folding over heated areas of the warmer may cause
overheating and damage the warmer!
tire and 180-200mm
tire. DMP Slingshot tire warmers are also compatible with 16.5” series race
ire warmer. Digital tire
front and rear tire warmer with a digital control box on
Power draw for front warmer is approx. 450W and rear warmer draws approx. 550W. These
power supply in order to effectively heat cycle.
Install front and rear tire warmers using high strength Velcro straps supplied on the warmer by
be properly elevated using front
Bunching, overlapping, or folding over heated areas of the warmer may cause