Spicer 126155 User Manual
Spicer, Drive axles
Spicer
®
Drive Axles
P/N:
SHAIS176
INFORMATION SHEET – 126155 NUT TORQUE
Affected Models: All Dana Models That Use the 126155 Locknut
Below are the general specifications for the 126155 locknut. This is a “torque prevailing” locknut.
The nut is to be used on drive pinions, input or output shafts that do not have a cotter pin hole drilled
thru the threads.
Part-No:
126155
Thread Size:
M48x1.5
Socket Size:
70mm
Torque:
840-1020 lbs. ft (1139-1383 N
.
m)
For spec’ing or service assistance, call 1-800-621-8084 24 hours a day, 7 days a week.
Or visit our web site at:
http://www.spicerparts.com
Dana Corporation
SHAIS176A
Copyright Dana Corporation, 2006
Heavy Vehicle Technologies and Systems Service
April
2006
All
Rights
Reserved. P.O.
Box
321
1
Printed in U.S.A.
www.dana.com
Toledo, Ohio 43697-0321