Spicer Drive Axles Illustrated Parts List DSS40, DDS40, RSS40, and RDS40 - Manual (Page 13)

Forward Axle
11
In February 2000, a product upgrade was made to the power divider section of the DSS/DDS40(P) models. The outer pinion support bearing
was upgraded from a three-piece bearing assembly & snap ring design to a one-piece roller bearing design. The new bearing part-no. 120080
has a higher load capacity and the assembly procedure is now simplified.
As part of the change, new production power divider covers 129965 (pump models) and 129969 (non-pump models) were released. The
120080 bearing can only be used with these new covers. The older power divider covers that are machined with a snap ring groove are no
longer available and are replaced in service by Power Divider Cover kits. The new kits will also include the new 120080 support bearing. The
older design bearing parts (78916 and 78937) will remain available for service as shown on the chart below.
Shown below is a quick reference chart for power divider cover castings for both “pump” models and “non-pump” models.
Part Number Description
New Service
Replacement
Part-No.
Notes
103526, 103536, 117311 PDU Cover - Pump Models 510792 Includes new 129965 cover & 120080 brg
129459, 508497 PDU Cover - Non - Pump Models 510793 Includes new 129969 cover & 120080 brg
129965 New PDU Cover order kit above Pump models
129969 New PDU Cover order kit above Non-Pump models
78916 Outer Pinion Brg & Race Assy still available Use only with OLD style PDU covers
78937 Outer Pinion Brg Snap Ring still available Use only with OLD style PDU covers
120080 New Outer Pinion Brg current Use only with NEW style PDU covers
High Entry 4x4, 6x6 and Military applications not affected by this change
Power Divider Stamped Part Number Model Type
Reference
Casting Number
103526, 103536, 117311, 129965, 510792 pump models 103526C
129459, 508497, 129969, 510793 non pump models 129459C