Spicer STOCKING RECOMMENDATION - NEW DESIGN 170-190-590 - Manual

Dana Aftermarket Š Dana Holding Corporation Š www.spicerparts.com Š www.dana.com
1 of 3
NEW Dana
Part-No
Dana
Recom m ends
Stocking of
NEW Parts New Part Description
OLD Dana Part-No.
(Before June 10, 2013)
504095 Yes KIT-SHIFT FORK & PIN (140008 FORK#) 512944 or 512945
504097 Yes KIT-DIFF LOCK SHIFT PARTS CONVERSION 512946 or 512947
140024 Yes SLIDING CLUTCH 131104
504096 Yes KIT-WHEEL DIFF SIDE GEAR w / WASHERS 513868
HS108-1 Yes SIDE GEAR THRUST WASHERS (MPQ-2)
not used in OLD
models
300HS100-1 Yes SIDE PINION THRUST WASHERS (MPQ-4)
not used in OLD
models
504126 Yes KIT-BEARING D170, S170E 514238
504127 Yes KIT-BEARING D170D 514011
504130 yes KIT-BEARING R170, S170 4.10-7.17 514014
504132 Yes KIT-BEARING R170D, S170D 4.10-7.17 514240
HAXL-PNI-42
STOCKING RECOMMENDATION -
NEW DESIGN 170-190-590 SERVICE KITS AND PARTS FOR
MODELS PRODUCED ON OR AFTER JUNE 10, 2013
PART NUMBER INFORMATION
DATE: August 27, 2013
TO: All Dana Aftermarket Group Spicer
®
Heavy Axle Customers
Affected Models: D/R170, D/R190, D/R590, S170, S190, S590
Below are two quick reference charts showing 170-190-590 NEW vs. OLD service part numbers and
Dana's stocking recommendations for the critical parts for the NEW design models.
Before the upcoming winter season approaches, you can quickly review the particular "usage" of the OLD
part numbers and begin to cross stock some of the NEW design part numbers. Doing so, you will be able
to service the NEW design axles if a carrier conversion is necessary or a repair situation is required.