Spicer 95262 - Manual

1
Spicer ®
Drive Axles
P/N: SHAIS191B
INFORMATION SHEET – 95262 NUT TORQUE
Affected Models: All Dana models that use the 95262 Locknut
Below are the general specifications for the 95262 locknut. This is a “torque prevailing” locknut. The
nut is to be used on drive pinions, input or output shafts that do not have a cotter pin hole drilled thru
the threads.
Part-No: 95262
Thread Size: 1.750” x 12
Socket Size: 2 ¼”
Torque: 840-1020 lbs. ft (1139 - 1382 N
.
m)
Copyright Dana Limited, 2013 Dana Aftermarket Group
SHAIS191B FEB 2013 All Rights Reserved. P.O. Box 321
Printed in U.S.A. Dana Limited Toledo, OH 43697-0321